"C-2" Double Chock w/Tightener, Padlock & Flag

Safe Use of Product

Cautions

1. For use on railroad car or locomotive wheels 28"-44". Do not use on smaller or larger diameter or on other types of wheels.
2. For rail sizes 75 to 141 lbs./yd.
3. Set brake before installing chock. Chock alone may not hold car in place.
4. Use 2 chocks per car being chocked.
5. DO NOT install chocks while car is moving.
6. Rail surface must be clean. Do not install this product on oily or greasy rail - product may slip.
7. Spurs are important in holding chock to rail. Rotate spur when edge becomes dull. Replace spurs when necessary. Dull or missing spurs may cause chocks to slip.
8. Do not use chocks on grades. If your track has a dip or a hollow, extra care must be taken to secure car.
9. Chocks may not hold if rail car is lifted up at one end.
10. Excessive vibration may cause a chock to slip.
11. Keep fingers and hands away from car wheel. Watch your head!
12. On double chocks, always use tarp strap (supplied with chocks) to draw chocks tight.